FS5252GS04100-H18.0-R02 Micro Speaker for Compact Devices
At Taizhou Fusheng Electronic Technology we build the FS5252GS04100-H18.0-R02, a micro speaker for products that need clear sound in a shallow housing. The driver measures 52 mm across and 18 mm deep, weighs no more than 62 g, and is rated IP67, so it can sit in equipment that sees dust or splashes. We supply it to makers of printers, computers, telephones, music players, pen recorders, digital cameras, toys and handheld equipment.
Acoustic Performance
The rated impedance is 4.0 ohm with a tolerance of 15 percent, measured at 4000 Hz and 1.0 Vrms. The resonance frequency is 2400 Hz with a tolerance of 20 percent when measured without a baffle, which is the figure to compare when the speaker is being designed into a new enclosure. Output sound pressure level is 85.8 dB with a 3 dB tolerance, measured at 0.1 m with 1.0 W over the average of the range from f0 to 10 kHz. Rated power is 10.0 W at 6.32 Vrms and maximum power is 15.0 W at 7.75 Vrms.
Frequency Range and Environment
The usable frequency range runs from f0 to 20 kHz at minus 10 dB, which covers voice prompts, alerts, music and the higher tones that make a product feel responsive. The operating temperature range is minus 30 to plus 80 degrees Celsius and the storage range is minus 30 to plus 85 degrees, so the driver suits equipment used indoors and in vehicles. The IP67 rating covers dust and temporary immersion, but the seal depends on how the speaker is mounted, so the gasket and the front cavity have to be designed together with the driver.
Fitting the Speaker into a Product
A 52 mm driver with an 18 mm depth fits a wide range of handheld and desktop products, but the acoustic result depends on the cavity behind the diaphragm and on the openings in front of it. We ask for the enclosure drawing, the expected sound pressure at the listening position and the power available from the amplifier, then check whether the rated 10 W input can be used or whether the design should run the speaker below its maximum. A back cavity that is too small raises the resonance and cuts the low end, and a grille that is too tight costs output in the upper range.

For a first sample, a plain mounting on a test box gives a baseline curve that can be compared with the specification. Once the enclosure is close to final, the same driver should be measured again in the real cavity, because the baffle and the sealing change the resonance and the level. We are glad to review the measurement and suggest whether a different model in the range, or a change to the port and the gasket, would meet the target more easily.
Quality and Supply
Our plant in Taizhou, Jiangsu runs under the ISO system, with incoming material checks, in-process inspection and a final test before packing. The company supplies SMD buzzers, magnetic and piezo transducers, mechanical buzzers, sirens, micro speakers, multimedia speakers and enclosure speakers, and the engineering team has more than 20 years of experience with electroacoustic applications. For the FS5252GS04100-H18.0-R02, the test report covers impedance, resonance, sound pressure level, rated and maximum power, and the dimensional check.
Ordering and Contact
To quote the micro speaker we need the model, the quantity, the connector or lead wire if one is required, the packing method and the destination. If the product is new, send the enclosure drawing and the target sound pressure, and we will confirm whether the standard model fits or whether a sample should be built first. Contact us at akinn@electronic-tech.cn or +86 19895366829, or call the office on +86 523 86219066. Our address is No. 98 Fenghuang West Road, Hailing District, Taizhou City, and we reply to inquiries within one working day.
Taizhou Fusheng Electronic Technology Co., Ltd. works with customers in telecommunications, consumer electronics, home appliances, automobiles, security, medical and industrial equipment. A short trial order is the usual way to start: we send samples from the standard range, the customer tests them in the real enclosure, and the volume order follows once the acoustic result and the packing are agreed. If a standard model is close but not exact, tell us which parameter needs to move and we will say what is possible.
Tel
Address
No. 98 Fenghuang West Road, Hailing District, Taizhou City